Anatomical Research Based on Methods of Bamboo Culm Softening
-
摘要: 【目的】为了探讨不同软化方式对竹材结构和主要组分的影响,筛选适合不同研究目的的最佳软化方法。【方法】以厚竹(Phyllostachys edulis 'Pachyloen’)竹秆为研究对象,采用常规石蜡制片结合显微技术和紫外光谱分析技术进行研究。【结果】除了三甘醇和氢氟酸软化的材料容易破裂外,水以及其他化学试剂软化均可获得较为完整、清晰的竹秆结构。且乙二胺为竹秆显微切片制备的最适软化介质。【结论】10%乙二胺100 ℃水浴软化最为方便快捷,适于以结构研究为目的,木质化程度高的竹类植物显微制片。对于竹秆组成成分研究,纯水100 ℃水浴软化为最佳选择。该文为竹材利用基础研究提供了参考依据。Abstract: 【Objective】 In order to explore the effects of different softening methods on the structure and main components of bamboo timber,and select the best softening method suitable for different research purposes. 【Method】 Microsections of bamboo culm of Phyllostachys edulis 'Pachyloen’ were taken as the research object,and the paraffin section method with microscopy techniques and UV spectroscopy was used.【Result】 The results showed that the structure was complete and clear after softened by water and chemical softener except triethylene glycol and hydrofluoric acid,which led bamboo culm structure rupture. Besides,ethylenediamine was the optimal softener for the preparation of microsection of bamboo culm.【Conclusion】 10% ethylenediamine softening in a water bath at 100 ℃ was the most convenient and fastest,which was suitable for microscopic sectioning of bamboo plants with high degree of lignification for structural research purposes. For component investigation of bamboo culm,the optimal softening treatment was being softened in a 100 ℃ distilled water bath. The results of this study provides a reference basis for basic research of bamboo culm utilization.
-
Key words:
- Bamboo culm /
- Softening pre-treatment /
- Slicing /
- Structure /
- Component
-
安鑫.毛竹纤维细胞壁微纤丝取向与超微构造研究[D].北京:中国林业科学研究院,2016. 陈红.竹纤维细胞壁结构特征研究[D].北京:中国林业科学研究院,2014. 丁水汀.木材切片材料的处理方法[J].林业科学,1983,19(1):109-111. 樊拥军,凌连群,林金星,等.木材制片的一种新方法[J].植物杂志,1993,20(3):42-43. 甘小洪.毛竹茎杆纤维细胞的发育生物学研究[D].南京:南京林业大学,2005. 韩书广,那斌,罗婉珺,等.不同含水率速生杨木DMA图谱分析及应用[J].东北林业大学学报,2011,39(9):69-70,96. 胡添翼,许婷婷,魏强等.厚竹高生长过程中竹秆淀粉粒的变化规律[J].西北植物学报,2021,41(11):1843-1852. 胡玉熹,林金星.高度木质化材料软化的简便方法[J].植物杂志,2000,27(3):31. 黄梦雪,张文标,张晓春,等.竹材软化展平研究及其进展[J].竹子研究汇刊,2015,34(1):31-36. 江泽慧.竹材解剖学研究进展[J].世界林业研究,2020,33(3):1-6. 姜海波,彭伊光.竹材软化工艺及设备[J].林业机械与木工设备,2007,35(4):53-54. 李澍农,张亚梅,余养伦,等.水煮处理对毛竹物理力学性能的影响[J].木材科学与技术,2021,35(3):59-64. 林金星.木材制片技术的改进[J].植物学通报,1993,10(3):61-64. 刘波.毛竹发育过程中细胞壁形成的研究[D].北京:中国林业科学研究院,2008. 路健,王伶.石蜡切片制作中的问题与解决[J].山西医科大学学报(基础医学教育版),2001,3(3):263. 韦鹏练.毛竹细胞壁主要化学组分分布规律的研究[D].北京:中国林业科学研究院,2016. 吴博士.酸性亚氯酸钠处理杉木木质素局部化学和结构表征[D].北京:北京林业大学,2017. 夏兆鹏,赵松南,武镜,等.木材软化剂及其制备方法和应用:中国,ZL201110271076.4[P]. 2014-02-12. 向娥琳.竹生长过程中细胞壁结构与性能的变化研究[D].成都:四川农业大学,2018. 杨淑敏,刘杏娥,尚莉莉,等.竹材木质素特性及表征方法研究进展[J].材料导报,2020,34(4):7177-7182. 曾月星.硬重木材的软化方法[J].木材工业,1991,5(2):45-46,32. 赵瑞艳,付钓钧,孙婷.不同软化处理方法对竹材质量的影响[J].佳木斯大学学报(自然科学版),2009,27(4):637-640.
点击查看大图
计量
- 文章访问数: 92
- HTML全文浏览量: 2
- PDF下载量: 105
- 被引次数: 0